Render hopper spray gun, FOUR NOZZLES, LONG ARM

INFO Render hopper spray gun

• Four nozzle render spray gun
• High volume, lightweight air powered spray gun
• Hopper size 4 ltr
• Simple & effective use
• One of the few spray guns that will spray apply sand & cement renders

The four nozzle hopper render spray gun will spray render and dash with an aggregate up to 5mm and sand and cement renders
It is simple and effective to use and the finish can be altered by adjusting the mix or aggregate used
A range of textures and finishes can be achieved; spraying at a lower air pressure (2-3 bar) will give a more textured finish
Render can be applied in one or two coats, normally up to 12mm to 15mm
The hopper spray gun will spray renders, waterproofing and tanking render, spritz and bonding mortars, concrete repair and cementitious coatings
The three nozzle gun will run off a 30cfm compressor

SPECIFICATIONS

• 3 x 20mm Ø nozzle
• Air consumption 600 ltr/min @ 4 bar
• Weight 2kg

APPLICATIONS

• spraying sand & cement renders & slurries
• cement based repair mortars
• tyrolean & textured renders
• lime mortars & putties
• stucco & lime plasters
• spritz & bonding mortars
• waterproofing & tanking coatings
• scratch coats & textures
• fine finishes & top coats