Refina Plaziflex Flatback Trowel 1.5mm blade

Refina Plaziflex flatback trowel

INFO

• stiffer plastic faced trowel blades

• replaceable blades & range of sizes
• excellent finish & lightweight to use
• cover large areas with less trowel pressure
• easier and faster closing in and flattening
• PLAZIFLEX blades are produced in the UK

New updated design

The trowels are slightly stiffer than the flexiback trowel blades and are for finishing and trowelling up finish plasters and coatings

These blades are to be used with the mini trowels. The mini trowels have a stainless steel blade with alloy shank and soft handle; they slot into the plastic blade holder bracket on the plastic blade

The  Refina Plaziflex flatback trowel can be used to achieve special finishes with external renders like acrylic and silicone pre coloured thin coat finishes  The trowel can be used on decorative wall and floor finishes and epoxy quartz

Use the PLAZIFLEX after the wet trowel (normally steel trowel) application then dry trowel and final cross trowel to finish

It’s a lot easier going on the arm, the plastic just glides over the surface and brings up the surface to a tight polished finish

The plastic blades on the Refina Plaziflex flatback trowel allow easier and faster closing in and flattening of the final finish coat. There is less need to wait for plaster to pick up, and can be used effectively when plaster is still wet

SPECIFICATIONS

• Blade thickness 1.5mm

APPLICATIONS for Refina Plaziflex flatback trowel

• For finishing and trowelling up topcoat plasters and finishes
• Leaves an excellent finish on the final skim coat

Level 5 finish