No products in the cart.
Refina Electric powered Plastering Sponge Float 110V / 240V
Refina Electric Sponge Float
The refina electric sponge float has many uses. Made by eibenstock It can be used to replace traditional plastic floating up of render to achieve a finish far superior to alternative finished by hand products.
Using the correctly chosen sponge replacement pad the float will close all the render down and leave it ready for a final fine sponge. The time you will save is unbelievable.
There are several replacement head attachments for the refina power sponge float from eibenstock including
Plastic trowel blades for finishing plaster
Small nail plates for scraping monocouche
Scraping blade for shaving monocouches and base coats flat works in same principle as the I section scraping toolsÂ
Choice of different sponges for finishing renders or plasters
Sponges and float blades are easily replaceable with velcro attachment
Send us a message and we can advise on the best attachment
Refina Electric Sponge Float
EPG400 hand held sponge power float
• Float disc and medium orange sponge are inc.
• Uses a slow speed motor to sponge or float finish large areas of spray or trowel applied plaster or render
• Float up to 50 sq metres per hour
• Range of sponges & plastic floats available
• Refina electric sponge float EPG400 Power Sponge & Float 500w
• Speed 60rpm
• Tool weight 3.5kg
• Disc 40cm
• Finish rate 50m/hr
• Vibration level 1.9m/s
• Noise level 76dBA
• Voltage 230v
• Floating & sponging up
• Power finishing wet plaster
Water pump and sprayer can be added to assist finishing
Additional information
VOLTAGE | 110 volt, 240 volt |
---|
Stephen Calvey (verified owner) –
Was expecting case but was not in box