No products in the cart.
Roll over image to zoom in
Click to open expanded view
PFT Cutmaster Insulation Board Cutter
£1,599.00 INC. VAT
|00256638||PFT Cutmaster 1100/310||£1,599.00 INC. VAT|
|00419549||1100/31 inc rafter cutter||£1,999.99 INC. VAT|
|00293072||1300/310||£1,999.99 INC. VAT|
PFT Cutmaster insulation cutter
The hot wire cutter for EPS is a professional way to cut your EPS insulation. Don’t make do with a knife – get yourself the best polystyrene cutter on the market, meaning no more EPS offcuts flying around the street and upsetting the neighbours.
Once you get your EPS hot wire cutter, you will wonder how you’ve gone without it for so long!
Available in different sizes and with built in measuring table
Used in addition with a Measuring tape
Cutting Tool PFT CUTMASTER
even allows cutting due to its cutting height of 1,110 mm and cutting depth of 310 mm in different formats: “height” and “thick”? No problem for the PFT CUTMASTER.
Thanks to the depth stop attachment screw at the cutting bow you can easily achieve cuts for wall projections and overlaps.
PFT CUTMASTER also handles cut-outs for e.g. cable ducts or waste water pipes easily thanks to its depth stop.
The cutting bow can be adjusted variably to any position. For easy handling the cutting bow locks at 45° and at 90°.
The two aluminium support brackets can be continuously adjusted and locked between 0° and 90°. The support bracket on the right side ensures that the remaining part of the cut does not fall down. The angular adjustment of the aluminium cutting bow can be fixed by an attachment screw.
New: PFT CUTMASTER 1100 / 310 including cutter for rafters
The hot wire cutting tool PFT CUTMASTER guarantees a clean and exact cutting of heat-insulating panels. Therefore you don’t have material residues on the building site. Angular notched rafter cutouts for the effective exterior insulation can be achieved with the hot wire cutting tool PFT CUTMASTER including cutter for rafters in no time at all. The additional cutting wire of the rafter cut notches angular cutouts cleanly and comfortably. The PFT CUTMASTER including cutter for rafters supports you in the clean and quick working with thermal insulation composite systems.
PFT Cutmaster 1100/310, 1100/31 inc rafter cutter, 1300/310
There are no reviews yet.