Enter PFT Wales are currently open for internet orders only. Please call ahead if you wish to collect anything. There may be delays on some orders due to the covid situation affecting deliveries in and out

Notice

Easymix Extra Time Plaster Retarder

£2.16£19.99

4 items sold

Clear
Get it Tomorrow, Jul 30 , Order in next
Compare

Easymix Extra Time Plaster Retarder

WHAT IS EXTRATIME?

Extratime is a chemical additive for use with finishing plasters like thistle multi finish & thistle board finish. The additive slows the curing and setting process of the plaster by slowing the chemical crystal formation that causes the gypsum plaster to set or harden. Extratime is recommended for moderate lengthening of finishing plaster setting times. Extratime will lengthen the setting time by 30-60 minutes depending on the ambient temperature, relative humidity of the environment and the surface being plastered.

Easymix Extra Time Plaster Retarder has been developed by a plasterer with over 20 years experience in the trade to allow more time to complete larger areas. It is ideal for ceilings and large walls.

“After years of being under pressure when working on large ceilings and walls I thought there must be some way of making the job easier.  I set out to develop something that was easy to use, inexpensive and provided a little more time – The result was Extratime”  M Shepherd, Founder, Eazymix Ltd.

Extratime can be used with all finishing plasters. It helps make plastering easier especially when working on large areas or in hot weather. It simply takes the pressure off.

USER

INSTRUCTIONS

Extratime is an additive that lengthens the setting time of finishing plaster.

Please follow the user instructions carefully. 

Failure to follow the instructions may lead to application issues.

5 SIMPLE STEPS

FOR EXTENDING PLASTER SETTING TIMES BY UP TO

60 MINUTES
  1. Pour clean fresh water into a mixing bucket

  2. Open Extratime sachet and whisk thoroughly

  3. Gradually add plaster and whisk thoroughly

  4. Continue adding and whisking plaster until smooth, lump free and it reaches the desired consistency 

  5. Apply exactly as normal plaster and enjoy up to 60 minutes extra time before the plaster sets.

    WHAT CAN EXTRATIME BE USED WITH?

    FAQs

    What Would You Like to Know? For any questions that are not answered below click here and contact us

    HOW LONG DOES Easymix Extra Time Plaster Retarder EXTEND THE SETTING TIME?

    Extratime is recommended for moderate lengthening of finishing plaster setting times. Extratime will lengthen the setting time by 30-60 minutes depending on the ambient temperature and relative humidity of the environment.

    DOES EXTRATIME AFFECT THE PLASTER?

    ?

    Extratime has been extensively tested and it does not affect the plaster mix or finished plastered substrate in any detrimental way.

    DOES THE PLASTER NEED TO BE APPLIED IN A DIFFERENT WAY?

    Once Extratime is added, mix and apply the plaster using exactly the same method as normal plaster.

    Extratime is suitable for use with all finishing plasters. The following products are suitable:

    • Multi Finish Plaster

    • Finishing Plaster

    • Board Finishing Plaster

    WARNINGS

    • Do not add directly to the plaster mix.

    • Avoid direct contact with eyes and skin.

    • Wear eye protection, protective gloves, long-sleeved clothing and trousers to prevent direct contact.

    • If eye contact occurs, immediately flush thoroughly with water for 30 minutes and seek immediate medical advice.

    • Wash thoroughly with soap and water after use.

    • Do not ingest. If ingested, seek medical advice immediately.

    • Once opened use within 48 hours.

    • For best before date see individual sachet.

    Eazymix Limited’s only obligation shall be, to replace such quantities of product proved to be defective.  The user shall determine the suitability in connection therewith. Since the product is used under conditions beyond our control, we cannot assume any liability for the results obtained or damage incurred in excess of the purchase price of the above mentioned product.

    FAQs

    What Would You Like to Know? For any questions that are not answered below click here and contact us

    HOW LONG DOES EXTRATIME EXTEND THE SETTING TIME?

    Extratime is recommended for moderate lengthening of finishing plaster setting times. Extratime will lengthen the setting time by 30-60 minutes depending on the ambient temperature and relative humidity of the environment.

    DOES EXTRATIME AFFECT THE PLASTER?

    Easymix Extra Time Plaster Retarder has been extensively tested and it does not affect the plaster mix or finished plastered substrate in any detrimental way.

    DOES THE PLASTER NEED TO BE APPLIED IN A DIFFERENT WAY?

    Once Extratime is added, mix and apply the plaster using exactly the same method as normal plaster.

 

 

Open Extratime sachet and whisk thoroughly

  1. Gradually add plaster and whisk thoroughly

  2. Continue adding and whisking plaster until smooth, lump free and it reaches the desired consistency 

  3. Apply exactly as normal plaster and enjoy up to 60 minutes extra time before the plaster sets.

 

Additional information

Quantity

1 sachet, 5 sachet, 10 sachet

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Add address

United Kingdom (UK)

Main Menu