The PFT G4 plastering machine mixes and pumps most factory blended dry premixed mortars continuously. PFT G4 plastering machines can be filled by bags or it can be placed directly under a silo with delivery hood and not only that the PFT G4 can be filled pneumatically by the PFT SILOMAT with injection hood.

The PFT G4 plastering machine is one of the best selling PFT machines available, you will however need a generator to power it but we can sort you out with all the information you need.

Technical Data For The PFT G4 Plastering Machine Standard 5.5 kW

• Part no.: 20 10 00 12

• Output: Conveying capacity:¹ 6 – 55 l/min

• Conveying pressure:¹ max. 30 bar

• Conveying distance:² up to 50 m

• Power connection: Three Phase current: 400 V, 50 Hz

• Fuse protection: 32 A

• Power cable: 5×4 mm², CEE-plug

• Drive: 2 geared motors: 400 V, 50 Hz

• Star wheel motor: 0.75 kW, approx. 28 rpm

• Pump motor: 5.5 kW, approx. 400 rpm

• Rotor/Stator: TWISTER D 6–3 P orange

• Pump capacity: 22 l/min

• Compressor: Output: 0.9 kW

• Max. pressure: p = 6 bar

• Air capacity: 0.25 Nm³/min

• Water connection: 3/4″

• Water pressure: 2.5 bar with the machine running

• Pressure level: 85 ± 1 dB(A) 1) Depending on motor speed, mortar quality, consistency and pump version 2) Depending on mortar quality, consistency, conveying height, pump version and diameter of mortar hose

• Dimensions/Weights: PFT G 4 Standard 5.5 kW

• Part no.: 20 10 00 12

• Dimensions L/W/H: 1,050 / 720 / 1,550 mm

• Filling height: 910 mm

• Total weight: 270 kg

We understand that a G4 plastering machine is a big purchase and you will have a lot of questions that you will need asking so please give us a a call so that we can help in anyway possible.

Also if you would like some financing options we can organise that for you as well, no problem at all.